Digital Finger Clip Pulse Oximeter With Automatic OLED Digital
Screen
Figure pulse oximeter The oximeter monitors fluctuations in blood
oxygen saturation
in small volume. Using fingers to care family health is easier than
going to hospital.
Features:
-OLED display: Dual Color OLED display. Better shows the data.
-Multi-direction display: Rotatable multidirectional display. 4
directions, 6 modes, allow
you to view your results in any direction.
-Alarm function: Set the alarm and beep according to your needs.
There will be a warning
once the measured values go beyond the setting. Know it
immediately.
-With case: Small in volum, light in weight, convenient to carry.
With a landyard and carrying
case, convenient to use and to storage
-Long battery life: 1) Low-power consumption, continuously work for
6 hours.
2)In the absence of signal, the product will be in after 8 seconds
to enter standby state.
SpO2 measurement range: 5%-99%
SpO2 accuracy 1: + 2 % in the range of 70 % -99%
+ 2% in the range of 70%-99%
Other scope is not defined
SpO2 Alarm range: Consistent with the display range, the set step
length is 1 %
Pulse cate range: 30 bpm-250 bpm
Pulse rate accuracy: 土1bpm
Pulse rate Alarm range: Consistent with the display range, the set
step length is 5bpm
Data update cycle: 0.25s-2s
SpO2 PR average: 8s
Pulse rate sound: PR tone
Peak Wavelength range: 500 nm-100nm
Maximum optical output power: 150 mW
Pulse rate display: Numeric
Display Specifications: four color OLED,0.96"
Power dissippanon: in normal measurement , less than 10 mA ,in
power off state,less than 50uA
Battery:DC 3V 2*AAA
Product Name | Fingertip Pulse Oximeter |
Display Type | OLED display |
Display Brightness | 1-4 levels can be adjusted |
Power by | 2 x AAA batteries |
SpO2 | Measurement range: 70%~99% |
PR | Measurement range: 30BPM~240BPM |
Power consumption | below 30mA |
Operation Environment |
Operation Temperature:5℃~40℃ |
Storage Temperature | -10℃~40℃ |
Ambient Humidity | 15%~80% on operation |
Air Pressure | 86kPa~106kPa |
